Adjusting The Phone's Volume Settings - Sanyo M1 Owner's Manual

Adjusting the Phone's Volume Settings

You can adjust your phone's volume settings to suit your needs and your
environment.
To adjust the ringer volume:
1.
Select
2.
Using the navigation key, choose a volume level, 1 Beep, or
Ringer Off and select Done (left softkey).
When selecting a volume, press MENU to put a check mark in the
Tip:
box next to Always Vibrate .This setting makes the ringer vibrate at
any volume level.
You can choose a volume level, 1 Beep , Ringer Off , Vibrate All , or
Silence All from standby mode (or adjust the earpiece volume during a
call) by using the volume key on the left side of your phone.
Adjusting the Alert Volume Settings
This setting controls the alert volume of Ready Link,Voicemail, message,
and Calendar/Alarm.You can set the alert volume separate from the ringer
volume setting.
To adjust the alert volume setting:
1.
Select
2.
Select Ready Link, Voicemail, Messaging, or Calendar/Alarm.
3.
Using the navigation key, select Separate Vol.
4.
Press the navigation key right or left to choose a volume level, and
select Done (left softkey).
48 Section 2B: Controlling Your Phone's Settings
> Settings > Sounds > Volume > Ringer.
> Settings > Sounds > Volume> Advanced Ringer.