Abbreviated Dialing; Dialing From The Contacts List; Using Speed Dialing - Sanyo Sprint SCP-7000 Operating Manual

Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. It allows you to dial a number by entering
the last 3-6 digits of any number in your Contacts directory. This feature becomes available
when you enable Abbreviated Dialing and enter the appropriate digits of a phone number.
To make a call using Abbreviated Dialing:
1. Enter the last 3-6 digits of a contact's phone number.
2. Press TALK or SPEAKER. If there is more than one matched number in your Contacts
list, Abbrev. Dial list appears.
3. Select the name you want to call, and then press TALK or SPEAKER to place a call.
Note: If there is no matched number, your phone dials the number you set for abbreviated dial
with the last 4-digits you entered.

Dialing From the Contacts List

1. Press MENU/OK to access the main menu.
2. Select Contacts and press MENU/OK.
3. Select Find/Add Entry and press MENU/OK.
Shortcut: Press the navigation key right to list entries.
4. Highlight the entry you want to call and press TALK or SPEAKER to dial the entry's
default phone number.
- or -
To dial another number from the entry, highlight the name and press MENU/OK,
highlight the number you wish to call, and press TALK, SPEAKER, or Call (left softkey).
Tip: You can also make a call by selecting Options (right softkey) > Call or Call:Speaker On.

Using Speed Dialing

With this feature, you can dial your favorite entries using one key press for locations 2-9.
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key for approximately two seconds.
- or -
From standby mode, press the appropriate key and press TALK or SPEAKER.
17