Using Call Guard - Sanyo M1 Owner's Manual

Using Call Guard

Your phone has two ways of alerting you when you are roaming off the home
network: the onscreen roaming icon and Call Guard. Call Guard makes it
easy to manage your roaming charges by requiring an extra step before you
can place or answer a roaming call. (This additional step is not required
when you make or receive calls while on the home network.)
To turn Call Guard on or off:
1.
Select
2.
Highlight On or Off and press
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit number
and press
2.
Press
– or –
Press any key to erase the pop-up message, and then select Options
(right softkey) > Roam Call.
To answer incoming roaming calls with Call Guard on:
1.
Press
charges will apply.)
2.
Press
– or –
Press any key to erase the pop-up message, and then select Options
(right softkey) > Answer.
If the Call Guard feature is set to On , you need to take extra steps to make
Note:
and receive roaming calls.
Section 2D: Controlling Your Roaming Experience
> Settings > Others > Roaming > Call Guard.
.
to proceed while the pop-up message is displayed.
. (A message will be displayed notifying you that roaming
to proceed while the pop-up message is displayed.
.
83