Setting Return To Standby Mode - Sanyo M1 Owner's Manual

Changing the Text Font Size
This setting allows you to adjust the display appearance when entering text
(for example, when writing a message or when adding a Contacts entry) or
when viewing a message.
To change the text font size:
1.
Select
2.
Select View or Input.
View to select Messaging or Browser.
Input to select Phone#s, Messaging, or Others.
3.
Select a font size and press
From the font preview display, select a font size by pressing the
Tip:
navigation key right or left.

Setting Return to Standby Mode

This feature allows you to select the way to return to standby mode.
To set this feature:
1.
Select
2.
A message appears. Select OK (left softkey) to continue.
3.
Select Automatically or End Key and press
Automatically to return to standby mode automatically when
no key is pressed for 30 seconds.
End Key to return to standby mode by pressing
End Key setting affects the battery's talk and standby times.
Note:
> Settings > Display > Others > Font Size.
> Settings > Display > Others > Return to Idle.
Section 2B: Controlling Your Phone's Settings
.
.
.
55