Abbreviated Dialing; Setting Headset Mode; Setting My Shortcut - Sanyo SCP-4900 Operating Manual

2. Highlight Settings and press OK.
3. Highlight Others and press OK.
4. Highlight Auto Answer and press OK.
5. Select the menu under Car/HS Use or Speaker Phone.
6. Highlight either 5 Seconds or 15 Seconds and press OK.
To deactivate this feature, select Off at step 5 above.

Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. If the last four digits you enter
do not match any stored phone book entry, the digits are automatically prepended with
the digits specified using the following steps.
To activate this feature:
1. From the Standby mode, press Menu to display the main menu.
2. Highlight Settings, and press OK.
3. Highlight Others, and press OK.
4. Highlight Abbrev. Dial, and press OK.
5. Select Enable, and press OK.
6. Enter a six-digit number, and press OK.
If you want to deactivate this feature, select Disable at step 5 above.
Tip: If you enter less than 6 digits, the display shows a warning message. See page 20 for using this
feature.

Setting Headset Mode

To turn the Turbo Button of the Headset On or Off.
1. From the Standby mode, press Menu to display the main menu.
2. Highlight Settings, and press OK.
3. Highlight Others, and press OK.
4. Highlight Headset Mode, and press OK.
5. Select On or Off and press OK.

Setting My Shortcut

You can set your own shortcut menu.
1. From the Standby mode, press Menu to display the main menu.
2. Highlight Setting, and press OK.
3. Highlight Others, and press OK.
4. Highlight My Shortcut, and press OK.
5. Press OK to display a drop down menu.
6. Highlight your desired menu option, and press OK.
63