Lubrication; Storage - Ventrac LQ450 Operator Manual And Parts Drawings

Lubrication

Lubrication is required at the following locations using
a lithium complex NLGI #2 grease. Refer to the main-
tenance schedule for service intervals.

Storage

Preparing the Mower for Storage
1. Clean the mower deck and frame.
2. Inspect for loose or missing hardware, damaged
components, or signs of wear. Repair or replace
any damaged or worn components
3. Inspect belts, spindles, and blades. Repair or
replace any damaged or worn components
4. Apply grease to all grease points.
5. Wipe off all excess grease or oil.
Removing the Mower from Storage
1. Clean the mower to remove any accumulated
dust or debris.
2. Inspect the mower as instructed in the daily
inspection section of this manual.
3. Test the mower to ensure all components are
working properly.
SERVICE
Service - 19