Kit Assembly - Metra Electronics 99-8244HG Installation Instructions Manual

ISO DIN radio provision with pocket
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Slide the radio into radio brackets
and secure with the screws
supplied with the radio. (Figure B)
3. Mount the radio/pocket/bracket
assembly to the radio housing/
climate control assembly with the
factory hardware.
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
99-8244HG

Kit Assembly

(Figure A) (Figure B)
7