Dash Disassembly - Metra Electronics 99-8244HG Installation Instructions Manual

1. Unclip and remove the a/c vent
panel above the factory radio and
surrounding the instrument cluster.
(Figure A)
Tip: Start at the passenger side
of the panel.
2. Unclip and remove the panel below
the factory radio. (Figure B)
99-8244HG

Dash Disassembly

(Figure A)
(Figure B)
3. Remove (4) 10mm bolts (2 on
top and 2 on bottom) securing
the factory radio then unclip and
remove. (Figure C,D)
Continued on next page
2
Upper bolts
(Figure C)
Lower bolts
(Figure D)