INSTALLATION INSTRUCTIONS FOR PART 99-8227S TOYOTA 4 RUNNER 99-8227S KIT FEATURES DIN Head unit provisions with pocket ISO DIN Head unit provision with pocket DDIN Head unit provision ISO Stacked Head unit provision Painted matte silver to match factory dash KIT COMPONENTS •...
99-8227S DASH DISASSEMBLY TOYOTA 4 RUNNER 2010 Unclip and remove the (2) climate control knob trim panels. (Fig. A) Unclip and remove the climate control. (Fig. B) Remove (4) 10 MM bolts securing the radio. (Fig. C) Continued on Pg. 2 ...
99-8227S DASH DISASSEMBLY TOYOTA 4 RUNNER 2010 Unclip and remove the vents from the factory radio panel. (Fig. D) Remove the (2) Phillips screws securing the trim panel on the top of the factory radio panel. (Fig. E) Remove the (4) Phillips screws securing the outer a/c vent control wheel trim pieces.
99-8227S KIT PREPARATION TOYOTA 4 RUNNER 2010 Attach the outer a/c vent control wheel trim pieces to the radio housing using the factory hardware. (Fig. A) Attach the trim panel to the top of the radio housing using the factory hardware.
99-8227S KIT ASSEMBLY TOYOTA 4 RUNNER 2010 DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
99-8227S KIT ASSEMBLY TOYOTA 4 RUNNER 2010 ISO DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
99-8227S KIT ASSEMBLY TOYOTA 4 RUNNER 2010 DOUBLE DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.