Adjusting The Bevel Gear Pair; Dism Antling The Slicing M Achine - Berkel 330M Instructions For Use, Installation And Maintenance

7 .5 ADJUSTING THE BEVEL GEAR PAIR

If ther e is too much play in the flywheel at the
star t of r otation pr oceed as follows to eliminate
it:
- Remove the cover (1 ) using a scr ewdr iver ;
- Tighten the nut (2 ) until all play is eliminated;
- Replace the cap (1 ).

8 . DISM ANTLING THE SLICING M ACHINE

The machines ar e made up of:
- Aluminium alloy str uctur e;
- Inser tions and var ious in stainless steel;
- Electr ic par ts and wir es, etc.;
- Electr ic motor ;
- Plastic mater ials, etc.
If disassembly and dismantling ar e to be
car r ied out by a thir d par ty, only consult fir ms
that ar e author ised in the demolition of the
above mentioned mater ials.
If you car r y out the dismantling your self the
mater ials must be separ ated accor ding to type
and consult a specialised
disposal.
Always abide by the r egulations in for ce in your
countr y.
fir m for their
Installation, use and maintenance 3 3 0 M
W ARNING: In any case it is necessary to
consult the manufacturer
personnel authorised by the manufacturer for
the removal of the
subsequent removal of the cutting wire so that
it can be disposed of safely.
DO NOT ABANDON SCRAPS W HERE THERE IS
FREE ACCESS (THERE SHOULD BE BARRIERS
AND SIGNS) BECAUSE THIS CAN BE VERY
DANGEROUS FOR
CHILDREN AND ANIM ALS; THE OW NER HAS
SOLE RESPONSIBILITY.
or qualified
circular blade and
PEOPLE, SPECIALLY
2 0