Berkel 330M Instructions For Use, Installation And Maintenance page 12

Installation, use and maintenance 3 3 0 M
Assembly of the flywheel:
M ove the machine car r iage all the way
towar ds the oper ator .
Take out the taper pin fr om the flywheel
shaft.
Attention:
hammer the pin at the taper ed end
(smaller diameter );
Inser t the flywheel so that the manoeuvr ing handle
is at the top and to the left, as shown in the figur e,
compar ed to the hole for the taper pin.
Check the cor r ect cor r espondence of the flywheel
shaft sleeve holes.
Inser t the pin into the sleeve as shown in
the figur e with the taper ed end (smaller
diameter ) towar ds the sleeve itself.
Hammer the opposite end of the pin
(lar ger diameter ) inser ting it all the way.
1 1