Safety Symbols - Keysight 16861A Installation And Quick Start Manual

Safety Symbols

Keysight 16860 Series Portable Logic Analyzers Installation/Quick Start Guide
Instruction manual symbol: the product is marked with this symbol when it
!
is necessary for you to refer to the instruction manual in order to protect
against damage to the product.
Indicates hazardous voltages and potential for electrical shock.
Earth terminal symbol: Used to indicate a circuit common connected to
grounded chassis.
The C-tick mark is a registered trademark of the Spectrum Management
Agency of Australia. This signifies compliance with the Australia EMC
Framework regulations under the terms of the Radio Communication Act
of 1992.
CE compliance marking to the EU Safety and EMC Directives.
ISM GRP-1A classification according to the international EMC standard.
ICES/NMB-001 compliance marking to the Canadian EMC standard.
KC certification mark to demonstrate compliance with the South Korean
EMC requirements.
South Korean Class A EMC declaration:
This equipment is Class A suitable for professional use and is for use in
electromagnetic environments outside of the home.
CSA is the Canadian certification mark to demonstrate compliance with
the Safety requirements.
Notice for the European Community: This product complies with the WEEE
Directive (2002/96/EC) marking requirements. The affixed label indicates
that you must not discard this electrical/electronic product in domestic
Safety Notices 5
55