Removing Paper Jams
If a paper jam occurs, one of the following messages appears on the control panel:
Message
Internal Misfeed
Misfeed: Tray 1
Misfeed: Tray 2
Misfeed: BypassTray
Misfeed: Dup. Unit
Remove Paper
Misfeed: Main Tray
See the section identified by the message and remove the jammed paper accordingly.
Removing Printing Jams
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and may
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
• Paper jam can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
Reference title
See page 148 "Removing jammed paper from
Tray 1".
See page 150 "Removing jammed paper from
the bypass tray".
See page 152 "Removing jammed paper from
the standard tray or duplex unit".
Removing Paper Jams
147