Smtp Tab - Ricoh SP 330DN User Manual

Item
Contact

SMTP Tab

SMTP
Item
Primary SMTP Server
Port No.
Authentication Method
User Name
Password
Device E-mail Address
Server Timeout
(seconds)
Enter the contact information of the machine. The contact information
entered here is displayed on the main page. Can contain up to 64
characters.
Enter the IP address or host name of the SMTP/POP3 server. Can contain
up to 64 characters.
Enter the port number for SMTP (1 to 65535).
Select an authentication method from the following:
[Anonymous]: The user name and password are not necessary.
[SMTP]: The machine supports NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for authentication. When
sending e-mails to an SMTP server, you can enhance the SMTP server
security level by connecting to the POP server for authentication.
Enter the user name for logging in to the SMTP server. Can contain up to 32
characters.
Enter the password for logging in to the SMTP server. Can contain up to 32
characters.
Enter the machine's e-mail address.
This address is used as the sender's address of e-mail messages sent from
this machine, such as notification e-mails. Can contain up to 64 characters.
Enter the number of seconds the machine waits before considering an
SMTP operation to have timed out (1 to 999).
Configuring the Network Settings
Description
Description
109