Ricoh SP 330DN User Manual page 18

1. Guide to the Machine
No.
2 [Menu] key
3 [Job Reset] key
4 [Wi-Fi Direct] key
5 NFC
6 Data In Indicator
7 Alert Indicator
8 [Power] key
16
Name
Press this key to configure or check the machine settings.
Pressing this key while specifying settings returns the display
to the initial screen.
Pressing this key while entering characters changes the
display so you can enter numerical values, alphabetic
characters, and symbols.
Press this key to cancel a job that is currently being printed
or received.
Pressing this key enables Wi-Fi while Wi-Fi is disabled and
the wireless LAN option is installed to the USB port on the
back of the machine. Press this key while Wi-Fi is enabled to
activate or deactivate the Wi-Fi Direct function.
This indicator lights up when the Wi-Fi Direct function is
active.
To use this key, the wireless LAN option needs to be installed
to the machine when the machine's power is turned off.
Allows you to connect a smart device to the machine when
you touch NFC on a smart device using the application
corresponding to the machine.
For details, see page 23 "Using Application for Smart
Devices".
Flashes when the machine is receiving data from a
computer. This indicator lights up when there is a Locked
Print file stored in the machine.
Flashes when the toner is nearly empty, or lights up when the
machine runs out of toner or a machine error occurs.
Press to turn the main power on or off.
This indicator lights up when the machine is turned on.
To turn off the machine, press and hold down this key for at
least three seconds.
If you press this key for less than 3 seconds, the machine
switches to Energy Saver mode. To recover Energy Saver
mode, press this key again for less than 3 seconds.
Description