Ricoh SP 330DN User Manual page 168

7. Troubleshooting
Problem
There is a considerable delay
between the print start command
and actual printing.
Documents are not printed properly
when using a certain application, or
image data is not printed properly.
Some characters are printed faintly
or not printed.
It takes too long to complete the print
job.
A printed image is different from the
image on the computer's display.
166
• Processing time depends on data volume. High volume
data, such as graphics-heavy documents, take longer to
be processed.
• To speed up printing, reduce the printing resolution using
the printer driver. For details, see the printer driver Help.
• The machine is calibrating color. Wait for a while.
Change the print quality settings.
• Photographs and other data intensive pages take a long
time to be processed so simply wait when printing such
data.
• Changing the settings with printer driver may help to
speed up printing.
See the printer driver Help.
• The data is so large or complex that it takes a long time
to be processed.
• If the Data In indicator is flashing, the data is being
processed.
• Just wait until it printing is resumed.
• If the Data In indicator on the control panel is flashing,
the printer is warming up. Wait for a while.
• The printer is adjusting the color registration. Wait for a
while.
• When you use some functions, such as enlargement and
reduction, the layout of the image might be different from
that displayed in the computer display.
• Check that the page layout settings are properly
configured in the application.
• Make sure the paper size selected in the printer
properties dialog box matches the size of the paper
loaded. For details, see the printer driver Help.
Solution