Ricoh SP 330DN User Manual page 144

7. Troubleshooting
Message
Cover Open
Update Firmware Unknown
Error
Indep.Sply.Prt.Cart.
Out of Paper: #
Memory Overflow
142
Explanation
The top or front cover is open.
Controller FW could not be
downloaded.
A non-supported print cartridge
is installed.
The indicated tray # (1, 2,
bypass) is out of paper.
This error occurs when FW
memory is not enough to save
the printing page.
Recommended Action
Open and then close the top or
front cover.
Turn off the main power, turn it
back on, and then download
the controller FW again.
If the download fails again,
contact your sales or service
representative.
Replace the toner to an
appropriate one. See
page 131 "Replacing the Print
Cartridge".
If the error message appears
even though the toner cartridge
is attached correctly, use a dry
cloth to wipe the part of the
toner cartridge that is in contact
with the machine.
Load paper into the indicated
paper tray.
See page 26 "Loading Paper".
Reduce the size of the data, and
then try the operation again.