Ricoh SP 330DN User Manual page 113

Wireless LAN Settings
Item
SSID
Communication Mode
Authentication
Encryption
WPA Passphrase
WEP Key Length
WEP Transmit Key ID
WEP Key Format
WEP Key
• If you are configuring the connection settings manually, check the SSID, authentication method, or
encryption key of the access point or wireless router in advance.
Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
[Infrastructure] is selected by default. Therefore, connect the machine to a
wireless router or access point.
Select an authentication method.
Select an encryption method.
If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
[Authentication], enter the WPA encryption key.
If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length
of the encryption key.
Select an ID number to identify each WEP key in case multiple WEP
connections are configured.
Select a format for entering the WEP key.
Enter the WEP key. The number and type of characters you can enter vary
depending on the length and format selected for the key. See the following:
• WEP key length: [64bit], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
• WEP key length: [64bit], Format: [ASCII]
WEP key max length: 5 characters (0x20-0x7e)
• WEP key length: [128bit], Format: [Hexadecimal]
WEP key max length: 26 characters (0-9, A-F, a-f)
• WEP key length: [128bit], Format: [ASCII]
WEP key max length: 13 characters (0x20-0x7e)
Configuring the Network Settings
Description
111