Entry In Medical Devices Registry - cardiowise XRCISE STRESS ECHO MED Owner's Manual

XRCISE STRESS ECHO MED
A.8

Entry in Medical Devices Registry

In compliance with §11 section 7 and §7 of the regulation on the erection, operation, and use of medical devices
(„MPBetreibV") as of June 29, 1998 (BGBt 1. p. 1762), the person who carries out metrological controls must
immediately record the measured values, the measuring method, as well as other evaluation results into the
registry of medical devices. As during metrological control of your medical device the registry of medical devices
was not available, we ask you to use the following data for your documentation.
Operator:
Facility:
Contact:
Adress:
Zip, City:
Manufacturer:
ERGO-FIT GmbH & Co. KG, Blocksbergstraße 165, D-66955 Pirmasens
Device Identification
Device name:
Model:
Serial-number:
Measuring method and evaluation:
Guide to metrological controls (LMK)
Appendix 15 or Appendix 23 of calibration regulations (EQ 15 or EQ 23)
Remarks:
Used standards:
Measured values see following page(s)
Metrological control i.o.; annual designation of sealing:
Metrological control not i.o.; old sealing obliterated
Technical and visual modifications as well as misprints reserved
__________________________________________
__________________________________________
__________________________________________
__________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
_______________________________________
___________________________
_______________________________
Signature
- © 2017 by ERGO-FIT GmbH & Co. KG
6 5