Transport; Setup Location And Installation - cardiowise XRCISE STRESS ECHO MED Owner's Manual

5 Transport and Installation
5.1

Transport

In order to avoid damage, cardiowise machines are transported by ERGO-FIT GmbH &
Co. KG directly or by an authorized freight forwarding company. After delivery, packaging
will be collected and disposed by ERGO-FIT GmbH & Co. KG. If cardiowise machines are
delivered by a freight forwarder, the customer must dispose the packaging himself or may
send it back to ERGO-FIT GmbH & Co. KG (transportation costs are on behalf of the
customer).
The machines do not have any shipping locks!
Please observe the following in order to move the table to the desired position:
1. Stand at the foot of the device. The table may only be moved after the tilt angle of
the table top has been moved to zero.
2. Release the foot-activated locks on both sides (Figure 1). Now you can easily roll
the device to the position you want. Ensure that you don't pull on the pads during
this process.
3. Push the table to the desired position. Adjust the table to the floor by turning the
adjustable feet with an open-ended size 19 wrench. (Figure 2 ).
4. After adjusting the feet, push the foot-activated locks down to lock them (Figure
3). It may be necessary to repeat steps 2-4 in order to achieve optimal positioning
of the table.
5. If you need to raise the reclining area, make sure that it is attached to the metal
frame below the pad.
5.2

Setup Location and Installation

⊗ Make sure that the surface underneath the machine is level and flat.
⊗ You must never remove small irregularities of the ground by laying wood,
cardboard or similar materials. This leads to an increased risk of accidents. Minor
unevenness can be compensated by means of the adjustable screw feet. Adjust
the leveling screw feet until the machine stands safely. It is mandatory to adjust
the levelling foot because it is the machine's support.
1 8
Technical and visual modifications as well as misprints reserved
Adjusting and locking the table
-
Transport and Installation
© 2017 by ERGO-FIT GmbH & Co. KG