Foot Activated Locks; Power Connection; Power Swith; The Control Panel - cardiowise XRCISE STRESS ECHO MED Owner's Manual

XRCISE STRESS ECHO MED
In order to avoid injuries, talk to the patient before adjusting the hip support and maintain eye
contact with the patient while adjusting the hip support.
6.3.11 Foot-activated locks
See Chapter 5.1 „Setup".
6.3.12

Power connection

See Chapter 5.4 „Plugging in".
6.3.13 Power switch
6.3.14

The Control Panel

Cardiowise exercise equipment is known for its outstanding ease of use. The XRCISE
STRESS ECHO MED is equipped with a user guidance system that is simple and easy to
understand.
Technical and visual modifications as well as misprints reserved
For horizontal adjustment to the patient in the
transverse direction, loosen the clamping lever.
Adjust the hip support manually. After adjusting the
support, re-tighten the clamping lever .
To remove the hip support, pull on the trigger
(mushroom button) and pull the hip support out.
To install the hip support, slide it into the holder until
it clicks into place.
The mains switch is located on the frame at the left
side at the foot of the table.
To turn the table on, toggle the switch to the I position.
To turn the table off, toggle the switch to the 0 position
.
- © 2017 by ERGO-FIT GmbH & Co. KG
3 1