XRCISE STRESS ECHO MED
6.3.14.1 The Buttons
Depending on the model you will find the following buttons on the control panel:
PLUS:
With this button you can increase the intensity or change parameters.
MINUS: With this button you can decrease the intensity or change parameters.
START: With this button you can confirm workout mode selections or parameter
settings.
STOP: With this button you can cancel a function or stop the machine.
BP:
Not assigned
6.3.14.2 The Display
The XRCISE STRESS ECHO MED is equipped with an LCD-display that consists of an
monochrome graphic display. In the section below you will find model-specific information
on displays, measuring units and their meanings.
Display
Explantation
Oxygen saturation
SPO
2
1/MIN
Rounds per minute
WATT
Current performance
TIME
Workout time
BP SYS
Not assigned
BP DIA
Not assigned
PULSE
Current heart rate per minute
6.3.14.3 Connections
At the back of the control panel of the XRCISE STRESS ECHO you can connect the device
to measure the oxygen saturation (optional). Moreover you will find a USB port.
Technical and visual modifications as well as misprints reserved
Unit
%
rpm
Watt
00:00 (min:sek)
mmHg
mmHg
1/min
-
© 2017 by ERGO-FIT GmbH & Co. KG
3 3