Ambient Temperature; Plugging In - cardiowise XRCISE STRESS ECHO MED Owner's Manual

Table of Contents

Advertisement

XRCISE STRESS ECHO MED
Please note that the adjustable feet at the foot of the table are cushioned with
rubber plugs. On rare occasions rubber (e.g. in combination with aggressive
cleaning agents) can leave marks and/or cause discoloration of the floor.
Set up the machine so that power switch and plug can easily be disconnected:
For safety reasons, please leave enough space around the machine for the user
to move safely and to avoid that bystanders are hurt by moving parts: Seen from
the access orientation, maintain a clearance of at least the training space plus 0,6
m. Provide enough space for an emergency disassembly. Adjacent machines
may use the same clearance.
Don't place the device in the immediate vicinity of devices with a high level of
electromagnetic radiation.
5.3

Ambient temperature

The exercise machine must not be used outdoors.
Your cardiowise exercise machine may be used at an ambient temperature of
+5°C to +40°C, a relative humidity of 10% to 80% (non-condensing) and an
atmospheric pressure of 700 hPa to 1060 hPa without causing any problems.
Operating height below 2000 m.
When switched off, the cardiowise machine may be stored at a temperature
between -5° to +40° and a relative humidity of 10% to 80% (non-condensing.
5.4

Plugging in

1.
Perform a visual inspection of the power cord and the input connector (power
entry module) before using the machine. Damaged power cords and connectors
need to be replaced immediately.
2
Plug the power cord into the provided mains input module. The plug clicks into
place automatically. Plug the other end of the cable into the outlet. .
Technical and visual modifications as well as misprints reserved
© 2017 by ERGO-FIT GmbH & Co. KG
-
1 9

Advertisement

Table of Contents
loading

Related Products for cardiowise XRCISE STRESS ECHO MED

Table of Contents