Who-Profiles - cardiowise XRCISE STRESS ECHO MED Owner's Manual

XRCISE STRESS ECHO MED
7.1.3

WHO-PROFILES

The WHO profiles are step profiles defined by the World Health Organization (profiles with
stepping strain increase).
WHO-Profile: stepping strain increase (step profile)
Initial strain:
Time:
Strain step:
Recovery:
Please proceed as follows:
1. Push the PLUS/MINUS buttons until the programme WHO-PROFILES is selected.
Confirm your choice with the START button.
2. You are now in the WHO PROFILE mode where you can see the settings. Press the
START button to start with the WHO PROFILE with preset settings for Time, Load
etc. ACTIVE will be shown on the display.
3. If you want to change the settings, select the settings in the WHO PROFILE mode
by pressing the STOP button. Then change them by pressing the PLUS/MINUS
buttons. Press the STOP button again to activate the WHO PROFILE.
4. Press the STOP button to stop the strain phase and to proceed to the recovery
phase (PASSIVE).
5. By pushing the STOP-button one more time, you will return to the main menu.
The automatic strain increase in the preset as well as in the individual WHO profiles can be
interrupted during operation by pressing the START button. The displayed information
changes from ACTIVE to HOLD. In the HOLD mode, the performance can be modified
manually with the PLUS and MINUS buttons. If you want to reactivate the automatic strain
increase, press the START button again. The display changes from HOLD to ACTIVE. In both
modes, you can change from the strain phase to the recovery phase by pressing the STOP
button. The display changes to PASSIVE. This allows the doctor to adjust the strain for his
patient more precisely than before.
Technical and visual modifications as well as misprints reserved
Strain of the first strain level [W]
Duration of each strain step [min]
Intensity of each strain step [W]
Strain in recovery phase [W]
- © 2017 by ERGO-FIT GmbH & Co. KG
3 9