Switching On; Switching Off; Components - cardiowise XRCISE STRESS ECHO MED Owner's Manual

6 Setup
6.1

Switching On

⊗ Before switching on your exercise machine, make sure the machine is plugged
in.
If you have connected several cardiowise machines to one circuit never switch on multiple
machines at the same time. Otherwise technical problems might occur.
⊗ Now turn the device on by activating the mains switch on the frame at the foot of
the device. The switch must be in position I. If the switch is in position O the
machine is switched off
⊗ The illumination of the display shows you immediately if the machine is switched
on.
6.2 Switching Of
⊗ Switch off your machine by pressing the power switch. The switch must be in
position O.
Take care that the switch-on and switch-off intervals don't fall below a time of 30 sec.
Otherwise faults may occur.
6.3

Components

2 4
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
Setup