Default Settings; Spo - cardiowise XRCISE STRESS ECHO MED Owner's Manual

7.4

Default Settings

For chancing the default settings, you can use the following buttons:
PLUS:
MINUS:
START:
STOP:
Language settings:
In the main menu simultaneously press PLUS and MINUS to open the "Service" menu.
Select the function "Language". Here you can change the language.
Date and Time settings:
In the main menu simultaneously press PLUS and MINUS to open the "Service" menu.
Select "Time and Date". Here you can change the settings.
7.5

SPO

With the XRCISE STRESS ECHO MED devices you can also measure the oxygen saturation
(SPO ). This is only possible during workout (e.g. manual workout).
2
The SPO module must be correctly connected to the machine (see chapter 6.4.3.
2
Connections). Attach the finger clip to forefinger, thumb or little finger. If measurement is
needed attach the clip to the big toe.
4 2
Technical and visual modifications as well as misprints reserved
You can you can navigate in the menu and increase settings
You can you can navigate in the menu and decrease settings
You can confirm your selections or settingsl
You can cancel a function or leave the menu
measurement
2
- © 2017 by ERGO-FIT GmbH & Co. KG
Operation