Device-Specific Behavior After The Workout; Funcional Test - cardiowise XRCISE STRESS ECHO MED Owner's Manual

XRCISE STRESS ECHO MED
7.2

Device-Specific Behavior after the Workout

You do not need to observe any special instructions at the end of the workout. Just stop the
workout. There is no increased risk due to coasting.
7.3 Functional Test
For a functional test please proceed as follows:
Brakes
⊗ Switch on the device. The display lights up as soon as the machine is ready.
⊗ Select MANUAL mode and increase the power range (see Chapter 7.1.1).
⊗ Move the pedals at the lowest speed (see the arrows!). The resistance increases.
Increase the speed range to its maximum. The resistance decreases. If this is the
case the rpm-independent operation works fine.
Related Functions
⊗ Make sure that the seat can be adjusted easily.
⊗ Make sure that the Head support can be adjusted easily.
⊗ Make sure that the Hip support can be adjusted easily.
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
4 1