User programmable functions:
⊗
The user programmable functions are only available with the ergometer folded
up.
6.3.3
Right handle
The handle position can be adjusted horizontally on the standard rail. It provides additional
stabilization of the patient during sideways tilting.
6.3.4
Seat
The seat can be positioned easily via a locking
mechanism, with a slight rotation it will be get more
easy.
The seat is removed by pulling briefly on the
mushroom button and turning the seat out of its
holder at the same time.
6.3.5
Load display
The display is mounted on a pivoting bracket. This allows it to be swiveled so that the patient
can see it.
The icons used on the display (Up and Down
arrow) provide feedback to the patients so they
know if they have to increase or decrease the
pedal frequency:
⊗
Orange light left /Up arrow: Pedal
⊗
Orange light right/Down arrow: Pedal
⊗
Green lights: Pedal frequency OK
2 8
Technical and visual modifications as well as misprints reserved
A positioning motor controlled with the manual switch
is used to adjust the horizontal position. The
supporting pad is automatically adjusted as well.
Please note: In order to avoid injuries, talk to the
patient before adjusting the seat and maintain eye
contact with the patient while adjusting the seat.
frequency too low
frequency too high
-
© 2017 by ERGO-FIT GmbH & Co. KG
Setup