Instructions For Safe Operation; How To Avoid Electric Shocks; Technical And Visual Modifications As Well As Misprints Reserved - © 2017 By Ergo-Fit Gmbh & Co. Kg - cardiowise XRCISE STRESS ECHO MED Owner's Manual

XRCISE STRESS ECHO MED
2.2

Instructions for Safe Operation

⊗ After delivery, make sure that the machine has not been damaged during
transport. In case of doubt, contact our customer service and do not start the
machine.
⊗ Slots and openings on the machine serve as ventilation. Do not cover these
openings, because this can cause the components to overheat.
⊗ Always check the power cord for damages before starting the machine.
⊗ Switch off the machine after the workout and disconnect it.
⊗ Set the device up in an open space for easier operation, and in order to reduce
possible sources of danger due to tilting and pivoting of the table top and due to
the pedal movements.
⊗ Connect the protective earth conductors (yellow/green) of the training bike to the
grounding point on the bed.
⊗ Equipment of the XRCISE STRESS ECHO MED, series are protected against
harmful ingress of water and solid objects according to IP21.
⊗ For XRCISE STRESS ECHO MED the protection guidelines according to EN
60601-1:2006 apply.
⊗ If you connect additional devices to the XRCISE STRESS ECHO MED line you
are committed to comply to the system standard EN 60601-1-1.
2.3 How To Avoid Electrical Shocks
⊗ Do not use damaged power cords.
⊗ Do not unplug by pulling on the cord.
⊗ Switch off and unplug the machine before you open it.
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
9