Head/Shoulder Support; Left Handle - cardiowise XRCISE STRESS ECHO MED Owner's Manual

XRCISE STRESS ECHO MED
6.3.6 Head and shoulder support
The head and shoulder support is intended to stabilize the patient on the table. The pads
provide a high level of comfort.
The support can be adjusted linearly in the horizontal direction in order to adjust it to the
patient's size by loosening the clamping lever. To move the head and shoulder support, lift it
slightly. This prevents damage to the table top. Once the support is in the desired position,
re-tighten the clamping lever to secure it.
If you don't need the head and shoulder support or while applying sanitary paper, simply
swivel the support up and away from the table top. The bracket with load display is swiveled
away at this time.
Loosening the clamping lever
Ensure that the support is folded up over the full swiveling range. Ensure that there is
sufficient clear space beside the table for this purpose. The table may only be operated with
the support folded up if the support is folded up completely - past 100°. Otherwise there is a
risk of patient injury since the head and shoulder support may flip back down .
6.3.7

Left handle

The handle above the head and shoulder support makes it easier to assume the position for
examination with the ultrasonic probe.
Technical and visual modifications as well as misprints reserved
move the head and shoulder support
- © 2017 by ERGO-FIT GmbH & Co. KG
2 9