Table of Contents
Advertisement
Instrument Operating System
Disk Drive Recovery Process
Updating the software (required after a recovery)
To install the latest software version, the software and installation instructions
are available at:
http://www.keysight.com/find/xseries_software
Table 3-5
Step
1. Exit the program
2. Log out of the default user (instrument):
— Select the Start icon
3. At the log in prompt enter:
— User Name:
— Password:
4. Follow the instructions on the software update
5. When the installation has finished, select
66
Installing the Software
Sign out
.,
.
administrator
Keysight4u!
web page.
When you see the message Programming FPGAs...Do NOT turn
off power to the instrument, be sure to do as it says and DO
NOT turn off the instrument power at this time for ANY reason. If
this process is interrupted the instrument most likely will need to
be sent back to an Keysight Service Center for servicing before it
will be usable again.
The installation process can take up to 45 minutes. Do not turn the
instrument power off or serious damage may occur. If any pop up
windows appear, click OK or Ignore to proceed.
want to restart my computer now
Keysight NFA X-Series Getting Started and Troubleshooting Guide
Change account settings
, select the
Yes, I
Finish
,
.
icon
Advertisement
Table of Contents
