Table of Contents
Advertisement
Quick Start
Turning on the Analyzer the First Time
Turning on the Analyzer the First Time
Initial power-on of the analyzer can be accomplished using the following
methods:
During the initial power-on process, the instrument turns off and restarts
several times. This only happens during the initial installation process.
Initializing the analyzer
Steps
1. Power on the analyzer a. Position the analyzer so
2. Viewing the End-User
License Agreement
12
Actions
you have easy access to
the power cord and plug
it in.
b. Press the power switch
(located next to the
lower right corner of the
display) to turn the
analyzer on.
After a brief startup, the following window appears giving you information about the
End-User License Agreement.
At this time, it is safe to turn off the instrument before initializing the software.
Keysight NFA X-Series Getting Started and Troubleshooting Guide
Notes
"Instrument Location and Rack
See
Mounting Requirements
requirements" on page 17
The analyzer can require more than 5 minutes to
power-on.
The Keysight Technologies screen appears followed by a
screen that allows you to select Windows7 or the
Recovery option.
"Power
and
for more details.
Advertisement
Table of Contents
