Front And Rear Panel Symbols - Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual

Front and Rear Panel Features

Front and Rear Panel Symbols

Front and Rear Panel Symbols
46
This symbol is used to indicate power ON (green LED).
This symbol is used to indicate power STANDBY mode
(yellow LED).
This symbol indicates the input power required is AC.
The instruction documentation symbol. The product is
marked with this symbol when it is necessary for the
user to refer to instructions in the documentation.
The CE mark is a registered trademark of the European
Community.
The RCM mark is a registered trademark of the
Australian Spectrum Management Agency.
This is a marking of a product in compliance with the
Canadian Interference-Causing Equipment Standard
(ICES-001).
This is also a symbol of an Industrial Scientific and
Medical Group 1 Class A product (CISPR 11, Clause 4).
The CSA mark is a registered trademark of the Canadian
Standards Association International.
This symbol indicates separate collection for electrical
and electronic equipment mandated under EU law as of
August 13, 2005. All electric and electronic equipment
are required to be separated from normal waste for
disposal (Reference WEEE Directive 2002/96/EC).
Indicates the time period during which no hazardous or
toxic substance elements are expected to leak or
deteriorate during normal use. Forty years is the
expected useful life of the product.
This symbol on all primary and secondary packaging
indicates compliance to China standard GB
18455-2001.
South Korean Certification (KC) mark; includes the
marking's identifier code which follows this format:
MSIP-REM-YYY-ZZZZZZZZZZZZZZ.
This equipment is Class A suitable for professional use
and is for use in electromagnetic environments outside
of the home.
To return unwanted products, contact your local
Keysight office.
Keysight NFA X-Series Getting Started and Troubleshooting Guide