Percussion Play Ground Fixed Marimba Installation Instructions

Installation Instructions Flat Pack
1.1
Ground Fixed
Marimba
Page 1 of 3
1.2
Instrument
Components:
x4
M6x20 Security Screw
x2
M6 Saddle Strap
x4
M8x60 Security Screw
x4
1.4
M8 Barrel Nut
M8 Square
Nut X4
Weight of heaviest part
BS EN 1176
1.3
Metric
Conversion:
250mm/ 10"
300mm/ 12"
400mm/ 16"
650mm/ 26"
750mm/ 30"
15kg (Notes)
1.5m/ 59"
Ground Fix
Pair Large Red
Beaters X2
Components
:
1. Assemble frame and notes
as shown in images 1.2, 1.3
and 1.4(see Assembly Guide)
2. Using M10 nuts and
200mm bolts supplied locate
through pre drilled holes and
secure bolts in place to
support in ground pole in
concrete. 3 Bars per leg at
120 degree angles. (1.3)
3.Excavate 2 holes for the
Marimba legs 250mm
diameter by 300mm deep in
desired location upon
decision from customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
5. Once happy with location
of the Marimba, fill holes
using rapid hardening
concrete. Be sure to compact
concrete around legs and
leave to dry according to
manufactures guidelines.
x6
x12
M10x200 Bar M10 Nut
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m 1.5m
1.5m
1.5m
KS1,2,
KS1 – 650mm
KS2 – 750mm
Ground Surface
KS2 - 300mm
KS1 - 400mm
Spares available from
42 Kg
percussionplay.com or from your
local distributor