Percussion Play Ground Fixed Grand Marimba Installation Instructions

Installation Instructions

Ground Fixed
Grand Marimba
Page 1 of 3
Instrument
Components:
x4
M10x30 Security Screw
10x3/4
Secure Screw
X4
Metric Conversion:
250mm/ 10"
400mm/ 16"
550mm/ 22"
1.5m/ 59"
Weight of heaviest part
BS EN 1176
40kg (Grand Marimba)
Ground Fix
Pair Large Red
Beaters X2
Components:
1. Attach the steel legs to each
end of the instrument with the
M10x30 security screws. (1.1)
(See Assembly Guide)
2. Attach Ground Fixing posts
to each of the legs (See Ground
Fix Post Installation Sheet)
3.Excavate 4 holes for the
Steel legs 250mm diameter by
400-550mm deep depending
on Key stage, in desired
location upon decision from
customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
5. Once happy with location of
the Instrument, fill holes using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines.
x4
x8
M10x200 Bolt
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
1.5m
KS1,2
KS2 - 400mm
KS1 - 550mm
Spares available form
percussionplay.com
48 Kg
or from your
local distributor