Appendix 4 Operation Examples Of When The Remote Head Module Is Mounted; System Configuration Example - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 4
This section describes operation examples of when the remote head module is mounted.

System configuration example

An operation is explained using the following system configuration.
(1)
(1) Master station (network number 1, station number 0)
• Power supply module: R61P
• CPU module: R04CPU
• Master/local module: RJ71GF11-T2 (start I/O number: 0000H to 001FH)
• Input module: RX10 (start I/O number: 0020H to 002FH)
(2) Intelligent device station (network number 1, station number 1)
• Power supply module: R61P
• Remote head module: RJ72GF15-T2
• Pulse input module: RD60P8-G (start I/O number: 0000H to 001FH)
*1 In the RX/RY setting of the master station, set 1000H to 101FH as the start I/O number of the pulse input module.
Operation Examples of When the Remote
Head Module Is Mounted
(2)
*1

Appendix 4 Operation Examples of When the Remote Head Module Is Mounted

A
APPX
97