Evaluation Kit Board Connections; Antenna; Figure 1. Evaluation Kit Board Connections - IDT ZWIR4532 User Manual

2.3 Evaluation Kit Board Connections

Figure 1. Evaluation Kit Board Connections
I2C Sensor
Connectors:
IDT FS2012
IDT Sensor Stick
Grove
Various
Jumpers to alter
the EV Kit setup
User Switches
Reset
Boot Select

2.3.1 Antenna

The antenna is to be 50Ω and examples are supplied in the evaluation kit. There is no matching network on the evaluation kit PCB if matching
is needed for other antennas–this has to be done after the SMA connector.
© 2018 Integrated Device Technology, Inc.
JTAG programming connection.
Only used if the two sections
are separated
USB control connection and
kit power
Ethernet Adapter connector
Auxiliary Power via USB cable. Use
only when programming board is
separated from the EV Kit board
Antenna SMA Connector
6
ZWIR4532 Evaluation Kit User Manual
Indicator LEDs
3.3V to ZWIR4532
3.3V to Sensors
USB 5V input
User LED2
User LED1
November 1, 2018