1. Hardware Setup
Required or Recommended User Equipment
The following additional lab equipment is required for using the kit:
P9221-G-EVK Transmitter Evaluation Board or any WPC-1.2.4 compliant receiver
Power supply capable of 18V/1.38A
2. Usage Guide
Overview of the P9242-G-EVK
Figure 1.
P9242-G V3.8 Evaluation Board Features
Input Select Jumpers
Vin Power Connector: Micro-USB
Vin Connector: USB-C
Vin Power Connector: Barrel
Green LED and Red LED
J4 I2C Connector
© 2018 Integrated Device Technology, Inc.
J5 IDT-Reserved Connector – Do Not Use
15
P9242-G-EVK Evaluation Board User Manual
Tx Coil
February 17, 2019