Table of Contents
Advertisement
Figure 2.1 ZSSC4151 SSC Evaluation Kit Assembly
Power Indicator
SSC Communication Board
With the three boards assembled as shown in Figure 2.1, attach the USB cable included in the kit between the
SSC Communication Board and a USB port on a PC. In some cases, the user's operating system detects the
board type and automatically installs a driver the first time that the SSC Communication Board is connected. For
this reason, the PC should be connected to the Internet during the first USB connection so that the operating
system can download a driver. If a driver fails to install, contact IDT for assistance.
2.2.
Software Setup
The ZSSC4151 Application Software provides a user-friendly graphical user interface (GUI). It is available for
download at www.IDT.com/ZSSC415xKIT. After downloading the software, extract the zip file contents.
Run the ZSSC415xSetup.exe file from the unzipped location to install the GUI. Launch the ZSSC415x program
from the Start Menu in Windows or by clicking the desktop icon created by the installation program.
To enable resizing the window, go to "SETTINGS" on the top menu and check the "No limits on resizing" as
shown in Figure 2.2.
© 2016 Integrated Device Technology, Inc.
ZSSC415x/6x/7x Evaluation Board
Pin 1
K1 Power Enable Jumper
4
ZSSC4151Evaluation Kit Start-Up Guide
SSC Sensor
Replacement Board
SSC Sensor
Replacement Board
Equivalent Circuit
TOP
2KΩ
BR1P
100Ω
BR1N
2KΩ
BOT
March 11, 2016
Advertisement
Table of Contents
