Cleaning The Appliance; Cleaning Accessories; Cleaning The Blender; Storage - Silvercrest SKMP 1300 B3 Operating Instructions Manual

CAUTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials . These may damage the surfaces
of your appliance .
NOTES
► It is best to clean the appliance directly after
use . This makes food residues easier to
remove .
► Processing foodstuffs containing strong pig-
ments, such as carrots, may cause staining of
the plastic parts . Such stains can be removed
using a little cooking oil .

Cleaning the appliance

■ Wipe the appliance with a damp cloth . For stub-
born soiling use a mild detergent on the cloth .
Wipe off any detergent residue using a cloth
moistened with clean water . Then carefully dry
the appliance .

Cleaning accessories

■ Clean the mixing bowl 6, lid 9, filling nose 8,
blender lid r with measuring cup e, drive unit
lid u and the insets 0 q w in warm water
with a small quantity of detergent . Any residues
can be removed with a washing-up brush . Rinse
all parts with clear, warm water and make sure
that all parts are dry before re-using them .
NOTE
► The insets 0 q w, mixing bowl 6 and the
blender lid r with measuring cup e can
also be cleaned using a dishwasher .
► If you clean them in the dishwasher, please
ensure that no plastic parts become trapped
under pressure between other objects . This
may cause them to become deformed .
► Wherever possible, place all plastic parts in
the top basket of the dishwasher .
■ 10 │
GB

Cleaning the blender

WARNING! RISK OF INJURY!
► Do not touch the blade z with bare hands .
■ Clean the blender t in warm water with a
little mild detergent . Afterwards, rinse all parts
with clean water so that no detergent residues
remain .
In most cases, you can also achieve sufficiently
hygienic cleaning directly after use in the following
way:
1) Put some water containing a little detergent
into the fully assembled blender t .
2) Place the blender lid r with measuring cup e
onto the unit, making sure that the lip on the
lid r seals the spout .
3) Switch on the blender t for a few seconds .
4) Pour out the washing water . Any residues can
be removed with a washing-up brush .
5) Afterwards, rinse out the blender t with
plenty of clean water, so that all detergent
residues are removed .
NOTE
► The blender t is suitable for cleaning in
a dishwasher .
► When cleaning the blender t in a dish-
washer, make sure that its plastic part is not
trapped between other objects . This may
cause it to become deformed!

Storage

■ Wind the power cable around the cable spool i
for storage .
■ Store the cleaned appliance in a clean, dust-free
and dry place .
SKMP 1300 B3