Cleaning The Appliance; Cleaning The Accessories; Cleaning The Blender - Silvercrest SKV 1200 B2 Operating Instructions Manual

cleaning the appliance

■ Wipe the appliance with a damp cloth . For
stubborn soiling use a mild detergent on the
cloth . Wipe off any detergent residue using a
cloth moistened with clean water . Then dry the
appliance carefully .

cleaning the accessories

■ Clean the mixing bowl 6, the lid 9, the cover
of the filling opening 8, the blender lid r with
measuring cup e, the drive protection cover u
and the attachments 0 q w in warm water
with a little detergent .
■ Any residues can be removed with a washing-
up brush . Rinse all parts with warm clean water
and make sure that all parts are dry before
re-using them .
NOtE
► The attachments 0 q w, the lid 9, the
mixing bowl 6, the blender jug C and the
measuring cup e are also dishwasher-safe .
► If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere . This may cause
them to become deformed .
► If possible, place all plastic parts in the top
basket of the dishwasher .

cleaning the blender

WARNING! RISK oF INjURy!
► Do not touch the blades z with your bare
hands .
■ Clean the blender t and the blender lid r
with measuring cup e in warm water and add
a mild detergent (washing-up liquid) . Then rinse
all parts with clean water so that no detergent
residues remain .
■ If this cleaning is not sufficient, you can remove
the blade holder A with the blade z from the
blender jug C:
SKV 1200 B2
A Blade holder
B Sealing ring
C Blender jug
–
For improved stability, remove the blender
lid r by turning it anticlockwise until it
disengages from the catch on the blender t
and then pull it upwards and off .
–
Turn the appliance upside down and turn
the blade holder A anticlockwise as far as
the stop using the two handles supplied for
this purpose . Now pull the blade holder A
directly upwards and out .
WARNING! RISK oF INjURy!
► Always handle the blades z carefully .
They are very sharp .
–
Pull the sealing ring B from the blade
holder A .
A
B
C
GB │ IE 25 ■
│