JDS Uniphase OLP-85 User Manual page 75

Command string
:DISP:OFF <NR1>
:DISP:OFF?
:ETH:MAC:ADDR?
:IP:ADDR?
:IP:ADDR:STAT
<STRING>
:IP:ADDR:STAT?
:IP:GATE?
:IP:GATE:STAT
<STRING>
:IP:GATE:STAT?
OLP-85
Parameter type / Response type / Unit / Info
In order to save power, the display switches off automatically after a
predefined time of inactivity.
If an external power supply is connected, the display doesn't switch off.
Valid values:
0 (15 sec)
1 (30 sec)
2 (1 min)
3 (2 min)
4 (10 min)
5 (Never)
Default:
5
Returns the time of inactivity after which the display automatically
switches off.
Response type:
<NR1>
See :DISP:OFF command for more information.
Returns the actual MAC address of the instrument.
Returns the IP address which is currently valid for the instrument. In
static mode, this setup corresponds to IP:ADDR:STAT; in DHCP mode,
it is provided by the DHCP server.
This setup is read-only.
Sets the static mode IP address.
Returns the static mode IP address.
Response type:
<STRING>
See :IP:ADDR:STAT command for more information.
Returns the IP gateway address which is currently valid for the
instrument. In static mode, this setup corresponds to IP:GATE:STAT; in
DHCP mode, it is delivered by the DHCP server.
This setup is read-only.
Sets the static mode gateway address.
Returns the static mode gateway address.
Response type:
<STRING>
See :IP:GATE:STAT command for more information.
9 R C
EMOTE ONTROL
C
OMMANDS
75