JDS Uniphase OLP-85 User Manual page 16

3 G S
ETTING TARTED
U
NPACKING THE INSTRUMENT
16
Battery operation
WARNING
Dangers when handling batteries
Handling batteries may be dangerous. Please note the
following safety instructions.
► Please note the battery operation safety information in the
chapter "Battery operation" on page
Replacing batteries
► Do not replace individual batteries. Always change all eight
batteries at the same time.
► Always use eight batteries of the same type; i.e. do not mix
rechargeable and non-rechargeable batteries.
Replacing batteries
Fig. 3.4 Replacing the batteries
1 RBP2 Li-Ion Battery Pack
2 Latch lock
3 AA battery tray
The battery compartment is on the back of the instrument.
1. Press down the latch to release and to open the lid of the
battery compartment.
2. Insert new batteries or remove the used batteries and replace
them with fresh ones.
NOTICE: Take care to insert the batteries correctly. The correct
polarity is indicated by a diagram inside the battery
compartment.
– or –
8.
OLP-85