JDS Uniphase OLP-85 User Manual page 35

OLP-85
Profile
1. Press the [A] key.
2. Tap the [Profile] button.
3. Tap the Profile which will be used for the test of the fiber
connector:
– E2000: Pass/Fail criteria for precision metal ferrule connec-
tors.
– Ribbon_: Pass/Fail criteria for single-mode and multi-mode
connectors from IEC 61300-3-35 standard.
– SM-UPC: Pass/Fail criteria for single-mode UPC connectors
from IEC 61300-3-35 standard.
– SM-APC: Pass/Fail criteria for single-mode APC connectors
from IEC 61300-3-35 standard.
– SM_PC: Pass/Fail criteria for single-mode PC connectors
from IEC 61300-3-35 standard.
– MM_: Pass/Fail criteria for multi-mode connectors from IEC
61300-3-35 standard.
– SFP_: Pass/Fail criteria for small form-factor pluggables.
Profiles contain the analysis parameters from which Pass/Fail
criteria are determined.
Tip
1. Press the [A] key.
2. Tap the [Tip] button.
3. Select the tip set on the Digital Probe to connect fiber for
inspection and tap on the tip set.
More
1. Press the [A] key.
2. Tap the [More] button to view or change the storage location,
settings and information of the Digital Probe.
5 P /PCM O
ROBE PERATION
C D P
ONFIGURING THE IGITAL ROBE
35