Table of Contents
Advertisement
Safety precautions
Safety precautions during maintenance
The inspection work should be done after 15 minutes or
more after shutting off the power supply.
Maintenance and inspection should be done by experts.
Turn off the power when not using for a long time.
In order to prevent failure due to capacity reduction of the
internal capacitor, replace the product in about 5 years.
Safety precautions in case of abnormality
Do not use damaged products.
Turn off the power supply at the time of power failure or
when the overheating prevention device is activated.
Stop operation by turning off the power immediately
when an abnormality occurs.
Trip reset should be carried out after confirming the safety
of the people and things around.
After the earthquake occurrence, it is necessary to confirm
the safety.
Do not approach the machine after the power recovery in
case of instantaneous power failure, because there is a
possibility of a sudden restart.
When the protection function is activated, remove the
cause and ensure safety before resetting and restarting.
6
Important
Danger
Preventing electric shock.
Caution
Preventing injuries,
electric shock.
Preventing injury due to
malfunction.
Preventing damages.
Danger
Cause of electric shock,
injuries, fire or breakage.
Preventing injuries, or
damages.
Preventing injuries,
electric shock or fire.
Preventing injuries.
Preventing injuries,
electric shock or fire.
Caution
Cause of injuries.
Preventing injuries.
Other safety precautions
Do not attempt to touch the keyway with bare hands
when it is provided on a shaft end of a motor or gear
head.
Turn off the power when installing, moving, wiring and
inspection.
In order to cope with unexpected movements due to
unexpected abnormalities, ensure customer safety and
safety within the operable range at the operation site.
Do not use the product except for specifications described
in the instruction manual and nameplate
Do not get on the product.
Do not place heavy object on the product.
Do not give strong impact to the product.
Do not modify, disassemble or repair.
When disposing of the product, it should be treated as
industrial waste.
Danger
Cause of injuries.
Preventing injuries,
electric shock.
Preventing injuries.
Caution
Cause of injuries, electric
shock, fire or breakage.
Cause of injuries, electric
shock or damages.
Cause of injuries, electric
shock, damages or
breakage.
Cause of injuries, electric
shock or fire.
Reduction of
environmental burden.
7
Advertisement
Table of Contents
