Panasonic MINAS-BL GU series Technical Instructions page 29

The function of parameters
Parameter
Name of parameter
No.
(RUNSTOP. FORWARD-REVERSE)
State of I 1
and I 2
I 1 I 2
OFF OFF
ON OFF
OFF ON
ON ON
(FORWARD-TRIP RESET)
State of I 1
and I 2
I 1/ I 2 function
33
I 1 I 2
selection
*2
OFF —
ON —
— ON
(REVERSE-TRIP RESET)
State of I 1
and I 2
I 1 I 2
OFF —
ON —
— ON
*1 Effective only when trip occurs
*2 When using the I 1 input, turn on the I 1 input enable switch (SW3) on the back of the product and
set the RUN switch on the front of the product to RUN.
When using the I 2 input, set the CCW / CW switch on the front of the product to CCW.
56
Description
Action
Stop
Deceleration stop when "16 Stop mode selection" is
CCW run
Stop
Deceleration stop when "16 Stop mode selection" is
CW run
Action
Stop
Deceleration stop when "16 Stop mode selection" is
CCW run
Trip reset (which must be retained 0.2 sec or longer)
Action
Stop
Deceleration stop when "16 Stop mode selection" is
CW run
Trip reset (which must be retained 0.2 sec or longer)
" 33 I 1/ I 2 function selection" Continued to the next page.
Parameter
Name of parameter
No.
*1
I 1/ I 2 function
33
selection
*2
*1
*1 Effective only when trip occurs
*2 When using the I 1 input, turn on the I 1 input enable switch (SW3) on the back of the product and
set the RUN switch on the front of the product to RUN.
When using the I 2 input, set the CCW / CW switch on the front of the product to CCW.
Description
(2) When " 30 Run command selection" is
motor can be commanded with
pad.
Rotation direction in this case can be set by parameter and
" I 1" " I 2" state. " I 1" " I 2" are off when only Digital key pad is
connected.
(FORWARD-REVERSE)
State of I 1
and I 2
Action
I 1 I 2
OFF OFF
CCW rotation selection
ON OFF
OFF ON CW rotation selection
Free-run stop irrespective of
ON ON
Trip reset (which must be retained 0.2 sec or longer)
(REVERSE-FORWARD)
State of I 1
and I 2
Action
I 1 I 2
OFF OFF
CW rotation selection
ON OFF
OFF ON CCW rotation selection
Free-run stop irrespective of
ON ON
Trip reset (which must be retained 0.2 sec or longer)
(RUNSTOP. FORWARD-REVERSE)
State of I 1
and I 2
Action
I 1 I 2
— OFF CCW rotation selection
— ON CW rotation selection
(FORWARD-TRIP RESET)
CCW run with switch
State of I 1
and I 2
Action
I 1 I 2
— ON Trip reset (which must be retained 0.2 sec or longer)
" 33 I 1/ I 2 function selection" Continued to the next page.
(PANEL), the
switch of Digital key
switch
*1
switch
*1
*1
57