Advertisement
• Thank you very much for your purchase of Panasonic product.
• Please read this instruction manual carefully for proper use.
• In particular, be sure to read Safety precautions (P.2 to 4) before use for safety.
• Keep this manual with care after reading, and read as necessary.
Be sure to give this Instruction manual to an end user.
If you are the first user of this product, please be sure to read the instruction
Manual (Overall) from our Web Site.
http://industrial.panasonic.com/ww/i_e/25000/motor_fa_e/motor_fa_e.html
This product is for industrial equipment. Don't use this product at general household.
●
Technical Instructions (Basic)
• Label of safety precaution is affixed to the product.
[Web address of Panasonic Corporation]
MINAS-BL KV series
Brushless Amplifier
* This product image is 200 W type
of KV-series.
Advertisement
Table of Contents
Related Manuals for Panasonic MINAS-BL KV Series
Summary of Contents for Panasonic MINAS-BL KV Series
- Page 1 MINAS-BL KV series Brushless Amplifier • Thank you very much for your purchase of Panasonic product. • Please read this instruction manual carefully for proper use. • In particular, be sure to read Safety precautions (P.2 to 4) before use for safety.
-
Page 2: Safety Precautions
Safety Precautions Important The following explanations are for things that must be observed in order to Ground the earth of the brushless motor and An over-current protection, earth leakage prevent harm to people and damage to property. brushless amplifier. breaker, over temperature protecter and emergency stop device must be installed. -
Page 3: Introduction/ Checking The Model
Safety Precautions Introduction/ Checking the model Important After unpacking CAUTION • Make sure that the model is what you have ordered. • Check whether the product has been damaged or not during transportation. Do not frequently turn on and off the master Do not place any obstacle that blocks ventilation If any deficiency should be found, power source. -
Page 4: Installation
Name of part Installation Name of part Install the brushless amplifier properly for preventing failure and accident. Transport Brushless amplifier • Use caution enough in transporting the unit to prevent injury by drop or fall, and avoid damage to the equipment. ●... -
Page 5: System Configuration And Wiring
System configuration and wiring Wiring System configuration/ general wiring diagram • In wiring to power supply (outside of equipment) from MCCB, use an electric wire of 1.6 mm diameter (2.0 mm ) or more both for main circuit and grounding. Standard wiring diagram Apply grounding class D (100 Ω... - Page 6 Wiring Maintenance/inspections/ How to reset a trip Maintenance/ inspections Connector for control signals (I/O) Connector on amplifier side: Parts No. S10B-PASK-2 (J.S.TMfg.,Co.,Ltd.) or equivalent. Routine maintenance and inspection are essential for proper and satisfactory operation of Mating connector:(Example of optional I/O connector kit ) the motor.
- Page 7 Conformance to EC directive and UL standard Conformance to EC directive and UL standard EC Directives Configuration of peripheral equipment The EC directives apply to all such electronic products as those having specific functions ・ 100 V system: Single phase 100 V to 120 V ± 10 %, 50/60 Hz and directly sold to general consumers in EU countries.
-
Page 8: Specifications
Specifications Cautions for Proper Use Cautions for Proper Use Item Specifications • Practical considerations for exporting the product or assembly containing the product Brushless MBEK MBEK MBEK MBEK MBEK MBEK MBEK MBEK amplifier 5A1BCV 5A5BCV 011BCV 015BCV 021BCV 025BCV 045BCV 083BCV When the end user of the product or end use of the product is associated with military Model... -
Page 9: After-Sale Service (Repair)
Pursuant to at the directive 2004/108/EC,article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15,22525 Hamburg,F.R.Germany For your records: The model number and serial number of this product can be found on either the back or the bottom of the unit.