Prime CCS Instructions for Use Manual
3.3 Analyzing QC and Proficiency Samples
Before running a QC sample verify the analyzer is Ready
to perform the analysis and that all the desired analytes are
available for selection. If necessary, refer to Chapter 2 for
additional information.
3.2.1 Analyzing Internal Quality Control Samples
From the Home screen, login if you are prompted to login.
1. Press the Login icon
2. Enter or scan your Operator ID then press
3. If required, enter or scan your Password then press
Figure 3.22 Operator ID Screen and Operator Password Screen
If login is not required or after logging into the analyzer:
1. From the Home Screen, press the QC button
2. Press the Analyze QC button
Figure 3.23 Quality Control Screens
3-12
.
to log into the analyzer.
.
.
.