–
Checking the left cornering light setting.
The light-dark boundary of the upper segment must run
exactly through the left marking.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the cornering light range. (
–
Press the SET button.
The left cornering light is switched off.
402427-01
The right cornering light test is started.
–
Wait for a few seconds until the upper segment of the right
cornering light lights up continuously.
–
Checking the right cornering light setting.
The light-dark boundary of the upper segment must run
exactly through the right marking.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the cornering light range. (
–
Press the SET button.
The cornering light is switched off.
402428-01
ELECTRICAL SYSTEM 16
p. 211)
p. 211)
209