14.1
Antilock brake system (ABS)
2
0 0 2
1
0 0 1
2
0 0 2
The ABS unit
1
unit, and return pump, is installed on the right vehicle side below
the fuel tank. One wheel speed sensor
3
0 0 3
on the front and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
–
Only allow the rear wheel to spin with the front brake
applied away from public road traffic if the ABS is
switched off.
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have
been approved and recommended by KTM.
–
Only use tires/wheels approved by KTM with the corre-
sponding speed index.
–
Maintain the specified tire air pressure.
–
Service work and repairs must be performed profes-
sionally. (Your authorized KTM workshop will be glad
to help.)
H01161-10
, which consists of a hydraulic unit, ABS control
2
is located in each case
BRAKE SYSTEM 14
159